Vector III and Minivec from RCRCM

This is pretty old news now, but certainly deserves mention here. The long awaited Vector III is finally a reality and in ready availability from RCRCM. The plane is 2.4m span and uses an SD8020 symmetrical airfoil and appears to have very nice flight performance. There’s also a 1.7m version called the Minivec available soon.

Here’s a build thread on RCGroups: Moulded Vector III Slope Aerobatic

Vector III Specifications:

Wing span = 2365mm
Length = 1350mm
Wing aerofoil= SD8020
Tail aerofoil = SD8020
Weight = 1400g
Controls = Elevator, Rudder, Ailerons, Flaps/Flaperons
Construction = Glass, carbon, balsa sandwich in an epoxy matrix

Minivec Specifications:

Span: 1.69m
Length: 1.0m
Wing Aerofoils: JH8-10-sym
Tail Aerofoil: JH8-10-sym